NovaStar Nova Smart LCT

Search Our Site

The Art Of Control · NovaStar Nova Smart LCT

Priced at $0

In war, the general receives his commands from the sovereign. ~ Sun Tzu
                 

Paradoxically, Nova Smart LCT doesn't require your brilliance.

But you'll still want to follow the instructions. At least until our AI Overlords take over.

Smart

Let's face it. Software is getting smarter by the day. Way smarter than those kids that always sat in the front row. Let's just accept it and embrace our new Overlords.

Canvas

Edit and then export the physical connections of your cabinets and data in easily-digested picture format. Your roadies might just turn into your groupies.

OSX

The Windows crowd has been getting preferential treatment for LED configuration software long enough. We are now also giving the OSX crowd preferential treatment.

Blocks

Smart LCT enables you to configure your display either online or offline by moving around the digital version of the panel or cabinet on screen where it simply snaps into place.

Hot

As in backup. Nothing sucks worse than the show not going on. Backup your ports and primary devices so that the only malfunction to affect the show will be wardrobe.

Auto

Not everyone is burdened with a creative streak. Auto connect lets you add new cabinets to the configuration layout and Smart LCT does the rest. Automatically.

Seams

Everyone hates seams but no one ever does anything about them. Well, until now. Smart LCT allows for single and multiple selection of seams that are magically adjusted.

Create

Create a new project or open an existing project online or offline. Smart LCT lets you access display configurations even if internet is blocked at your kid's band practice.

Devices

Add all the controllers in your inventory to Smart LCT and set their properties, mapping position and even rotation to where you want them for when you need them.

Specifications · NovaStar Nova Smart LCT V3.2.0

Therefore, in your deliberations, when seeking to determine the military conditions, let them be made the basis of a comparison. ~ Sun Tzu
 
Version 3.20

Software · Manuals

NovaStar Nova Smart LCT
Windows OSX Android iOS

NovaStar Nova Mars LCT
Windows OSX Android iOS

NovaStar Nova Studio
Windows OSX Android iOS


Controllers

NovaStar Phobos Series
MCTRL 4K MCTRL R5

NovaStar Thunderview Series
S1 V1

NovaStar Professional Series
NovaPro HD Jupiter J6

NovaStar VX Series
VX4S VX4U VX2U

NovaStar MCTRL Series
MCTRL660 MCTRL600 MCTRL300 MSD300


Receiving Cards

NovaStar Armor Series Armor A8 · A8s Armor A7 · A7s Armor A5 · A5s Armor A4 · A4s

NovaStar MRV Series MRV 560 MRV 470 MRV 420 · 410 MRV 360 · 330 MRV 320 · 300

Installation

NovaStar Nova Smart LCT · V3.1.3 · software installation instructions
01. NovaStar Nova Smart LCT · Install
NovaStar Nova Smart LCT · V3.1.3 · software installation instructions
02. NovaStar Nova Smart LCT · Install
NovaStar Nova Smart LCT · V3.1.3 · software installation instructions
03. NovaStar Nova Smart LCT · Install
NovaStar Nova Smart LCT · V3.1.3 · software installation instructions
04. NovaStar Nova Smart LCT · Install
NovaStar Nova Smart LCT · V3.1.3 · software installation instructions
05. NovaStar Nova Smart LCT · Install
NovaStar Nova Smart LCT · V3.1.3 · software installation instructions
06. NovaStar Nova Smart LCT · Install
NovaStar Nova Smart LCT · V3.1.3 · software installation instructions
07. NovaStar Nova Smart LCT · Install
NovaStar Nova Smart LCT · V3.1.3 · software installation instructions
08. NovaStar Nova Smart LCT · Install
NovaStar Nova Smart LCT · V3.1.3 · software installation instructions
09. NovaStar Nova Smart LCT · Install
NovaStar Nova Smart LCT · V3.1.3 · software installation instructions
10. NovaStar Nova Smart LCT · Install

Interface

NovaStar Nova Smart LCT · V3.1.3 · software interface
11. NovaStar Nova Smart LCT · Interface
NovaStar Nova Smart LCT · V3.1.3 · software interface
12. NovaStar Nova Smart LCT · Interface
NovaStar Nova Smart LCT · V3.1.3 · software interface
13. NovaStar Nova Smart LCT · Interface
NovaStar Nova Smart LCT · V3.1.3 · software interface
14. NovaStar Nova Smart LCT · Interface
NovaStar Nova Smart LCT · V3.1.3 · software interface
15. NovaStar Nova Smart LCT · Interface


Fine Print

Specifications NovaStar and Telematics reserves the right to change any specifications without prior notice.

Manual · NovaStar Nova Smart LCT V3.1.3

While heading the profit of my counsel, avail yourself also of any helpful circumstances over and beyond the ordinary rules. ~ Sun Tzu

NovaStar · Nova Smart LCT · Nova Taurus LCT · Nova Mars LCT · Nova Studio
NovaStar Nova Smart LCT · Introduction
Smart LCT is a new generation of LED Display Configuration software from NovaStar.

The software relies on NovaStar Controllers including the Professional and Phobos Series and the VX and MCTRL Series.

With Smart LCT, NovaStar has made significant advances towards creating an intuitive software for setting up complex LED Display designs, both online and offline. The software is compatible with recent versions of Windows and with OSX.

We have created a quick reference guide for Nova Smart LCT that should provide answers for most every question that comes up during an installation. We otherwise encourage you to download the manual for a comprehensive solution.

Nova Smart LCT V3.1.3.0 is compatible with:

 • NovaStar Professional Series Sending Cards (Controllers): 3D, NovaPro HD

 • NovaStar Phobos Series Sending Cards (Controllers): 4K, R5

 • NovaStar VX Series Sending Cards (Controllers): VX4S, VX4, VX2

 • NovaStar MCTRL Series Sending Cards (Controllers): 300, 500, 600·660

 • NovaStar MRV Series Receiving Cards: 200·210·220, 300·320, 330·340, 350, 360·365

 • NovaStar Armor Receiving Cards: A8s

 • NovaStar Monitoring Cards: MON300

 • NovaStar Multifunction Cards: MFN300

 • NovaStar Sensors: NS060C, MTH310

Installations rely on a Sending Card (also referred to as the Controller) connected to the PC using DVI or HDMI, and an USB or RS232 connection and then to the LED Display through Ethernet.

Nova Smart LCT runs on Windows 10 and legacy versions and on OSX. CPU performance is a minimum of 1.0 GHz with 256 MB.

In practice, a modern mid-range consumer computer that is online is recommended.

NovaStar · Nova Smart LCT · Nova Taurus LCT · Nova Mars LCT · Nova Studio
NovaStar Nova Smart LCT · Online Offline Designs
Select the Create Offline Design or Create Online Design menu for new projects or to access an existing design, the Open menu.

The top menu is typical of many programs and generally self-explanatory. Note that the menu changes between Online and Offline Designs.

File

⮡  New  ⭢ Open  ⭢ Save  ⭢ Save As  ⭢ Recent Projects  ⭢ Close  ⭢ Exit

Edit

⮡  New  ⭢ Undo  ⭢ Redo  ⭢ Copy  ⭢ Paste  ⭢ Select All  ⭢ Delete  ⭢ Group  ⭢ Ungroup

The Group/Ungroup function brings all the cabinets together for editing or moving or returns them to single cabinets.

View

⮡  Zoom In  ⭢ Zoom Out  ⭢ 1:1  ⭢ Zoom To Fit  ⭢ Online  ⭢ Cabinet Info  ⭢ Auto Connect  ⭢ Show Grid  ⭢ Snap  ⭢ View

The View menu includes Online status for the cabinets and their sending and receiving cards and port information and an Auto Connect that causes any added cabinets to be connected and snapped to each other or to a custom Grid. Select from a front or back view of the cabinet layout. Zoom In and Zoom Out are standard commands as is view settings of 1:1 scale. Zoom to Fit adjusts the cabinets in the editing area to a preset size and start position.

Operation

⮡  Reconnect  ⭢ Refresh  ⭢ Send  ⭢ Save To Hardware  ⭢ Hot Backup  ⭢ Restore Settings  ⭢ Quick Seam  ⭢ Test Pattern

The Operation menu is active when Create Online Design is selected. The menu will Reconnect and Refresh Devices, Send the screen configuration to the controller or Save To Hardware or backup devices and ports using Hot Backup. The Quick Seam Brightness Adjustment is available to create a more uniform display between cabinet edges and Test Pattern provides for a quick review of the display performance.

Tools

⮡  Calculator  ⭢ Test Tool

The Windows calculator is available through this shortcut and a series of diagnostics are accessed through the Test Tool.

Download the Nova Smart LCT Manual and review Section 2.1.0 through 2.3.0.

Choose from a selection of languages in the drop-down menu including English, French, German, Spanish, Russian and Chinese.

Download the Nova Smart LCT Manual and review Section 3.1.

NovaStar · Nova Smart LCT · Nova Taurus LCT · Nova Mars LCT · Nova Studio
NovaStar Nova Smart LCT · Online Offline Designs
Choose between Create Offline Design or Create Online Design in the Nova Smart LCT interface and Create A New Project. The Offline Design allows for an LED Display to be configured without having either the Devices (Controllers) or Cabinets connected to the PC. Be certain to select Refresh in the Device drop-down menu before proceeding.

• Name The Project: Choose a Name and a Network Path on which to store that file.

• Select Device: (Offline Design) Select from a drop-down list of Devices (Controllers).

• Select The Cabinet: Select from a drop-down list of Manufacturer and the Type which specifies a corresponding cabinet or panel.

• Screen Size: Specify the number of Cabinet Columns and Cabinet Rows.

•  Maximum Load Of Device: Controllers support a Maximum Width and Maximum Height of pixels depending on the model. Enter those numbers.

• Connection Type: Choose from the Auto Path or one of 8 standard paths.

Download the Nova Smart LCT Manual and review Section 4.1 and Section 5.1.

In Manage Cabinets, these functions are accessed.

⮡   ◰ Select / Export  ⭢  ◰ Export All  ⭢  ◰ Delete  ⭢  ◰ Add  ⭢  ◰ Edit

Export the information of selected cabinets or all cabinets to a file on the network, or add, edit or delete selected cabinets from the display.

Download the Nova Smart LCT Manual and review Section 4.1.1.

When a new project is created, choose from the Normal Mode which shows the default cabinets or the Smart Mode which extends the menu to include Screen Size, Maximum Load and Connection Type.

Download the Nova Smart LCT Manual and review Section 4.1.2.

The LED Display Configuration window opens when either an Offline Project or Online Project is selected and the Create A New Project window is completed and confirmed.

Download the Nova Smart LCT Manual and review Section 4.2 and Section 5.2.

In the Project window, the Device column is positioned to the left of the Canvas.

In an Offline Project, the plus icon at the bottom left corner of the Device column opens the Add Devices window. This feature is not present in an Online Project.

Select from Optional Devices and Add those to the Selected Devices column or Remove them in the same manner.

Select Okay to complete the operation.

Download the Nova Smart LCT Manual and review Section 4.2.1 and Section 5.2.1.

Right-click the blank area of the Canvas to display its properties.

Left-click the blank area of the Canvas to display Grid Color, Grid Spacing, Screen Name and Disable Edit in the Properties column to the right of the Canvas.

Download the Nova Smart LCT Manual and review Section 4.2.2.

Select the Controller in the Device section on the left of the window and the Cabinet Properties are revealed on the right.

Those properties include the Manufacturer and Cabinet Model, the Controller, Port Name, Connection, Mapping Position and Test Patterns.

Where a Controller with rotation functions such as the MCTRLR5, select a single cabinet and set the center and angle of rotation to enable free rotation.

Import Cabinets

Select the plus icon in the tool bar to launch the Manage Cabinets window and select the 🖉 icon to open the Edit Added Cabinet window.

Select More to access the *.rcfgx file or instead edit the Size and Weight, Power and Pixel Pitch. Select Save when the new cabinet is created.

Add Cabinets

Select a Device (Controller) and Ethernet Port in the Device area.

Add a single cabinet or batch of cabinets and go to the editing area. Click and drag the mouse in the blank area to add multiple cabinets. Click the mouse repeatedly in the editing area to add multiple cabinets, but only one at a time. Right-click the mouse to stop.

Cabinet Connection

Select a cabinet connection type on the tool bar.

Select View and Auto Connect.

Select cabinets in the editing area. Then connecting lines between the cabinets appear automatically or hold and drag the mouse on the editing area to add more cabinets and connecting lines. Right-click to stop adding cabinets. The first connection type in the tool bar is applied to connect cabinets by default in “Auto connection” mode.

Alternatively, select View and deselect Auto Connect.

Add cabinets in the editing area. No connecting lines appear between cabinets. Select the added cabinets and choose a connection type in the tool bar.

Group Cabinets

Add cabinets to the editing area to combine the selected cabinets into a group. Set the Group Name in the Properties. To add more cabinets, right-click and select Add To Group and choose a Group Name.

Delete Lines

Select the Cabinets and Delete Lines to disconnect the Cabinets.

Download the Nova Smart LCT Manual and review Section 4.2.3 and Section 5.2.2.

The Load Condition Warning Area shows the loading capacity of Ethernet ports. Blue denotes that the load is normal and Red denotes the load is exceeded.

Download the Nova Smart LCT Manual and review Section 4.2.4.

Select the Hot Backup icon in the right corner of the top menu. A wizard tutorial automatically follows in the Hot Backup Canvas

Add a Device to the Hot Backup Canvas. While the Device is in its initial state, select the bar in the right side of the Device and set it to blue for a Master Device or brown as a Slave Device.

When set as a Slave Device in the initial state, the Device Backup and Port Backup are not available. When Devices or Ports are backed up, the Device cannot be set as a Device Backup separately.

Simple Mode

To create a backup between Devices, move one or more to the Hot Backup Canvas. Drag one onto the other to backup the Devices. A dotted border will appear around the two Devices.

Once the two Devices are backed up, a toggle icon appears in the connecting line that allows toggling between Master and Slave. The delete icon in the top right corner of the dashed box surrounding the Devices will cancel the backup.

Note that Hot Backup requires Devices with the same communication ports and that once backup is completed, the Ethernet Ports of the two Devices will be backed up correspondingly.

To create a backup between the Ethernet Ports of a single Device, move it to the Hot Backup Canvas. The Port icon in the top right of the Device will backup the the Ports.

Advanced Mode

Select the Port Name drop-down menu and add two or more Devices to be added to identical communication ports.

Select the Add icon and the sequence number of the Primary Sending Card, Backup Sending Card, Primary Ethernet Port and Backup Ethernet Port.

Note that if the sequence numbers of the Primary Sending Cards and Backup Sending Cards are the same, the Ethernet Ports of one device are backed up. If the numbers are different, the backup is between Devices.

Select the Add icon at the bottom of the page to add the Devices.

Download the Nova Smart LCT Manual and review Section 4.3 and Section 5.5.

Select the Send icon in the top menu to send the LED Display Configuration to a corresponding Device.

Note that a warning will appear if the Loading Capacity of the Ethernet Ports are exceeded.

Download the Nova Smart LCT Manual and review Section 4.4 and Section 5.6.

Seam Brightness Adjustment completes the LED Display Configuration in Online Projects.

Select Operation in the top menu and in the Quick Seam Brightness Adjustment sub-menu, Fast Adjust Seam Data to open the Seam Brightness Adjustment window.

The number of cabinets in the Seam Brightness Adjustment window will be the same as those on the LED Display Configuration window.

⮡   ◰ Send  ⭢  ◰ Save To Hardware  ⭢  ◰ Save

Send the Seam Brightness data to sending cards or save to hardware or save the data to a file.

⮡   ◰ Area Splitting  ⭢  ◰ Cabinet Restoring  ⭢  ◰ Selection

Area Splitting sets the number of rows and columns after a Cabinet is split and Cabinet Restoring returns it to the previous state. Selection enables highlighting columns and rows of Cabinets.

Select the border of Cabinets to display their details. Drag the Selected Area Parameters Adjustment to adjust.

Gray equates to no adjustable value if not selected, Light Green equates to adjustable value if not selected.

Blue equates to no adjustable value if selected, Dark Green equates to adjustable value if selected.

Download the Nova Smart LCT Manual and review Section 5.3.

Restoring Seam Data will do just that once the data file has been saved in Seam Adjust File.

Download the Nova Smart LCT Manual and review Section 5.4.

V-Sender supports NovaStar MCTRL300, MCTRL660 and MCTRL4K, VX4S, NovaPro HD and 3D HD. Note that the interface may change from one Device to another.

Select the ⚙ icon in the Device List on the Nova Smart LCT start-up window.

Download the Nova Smart LCT Manual and review Section 6.1.

Select Add Devices from the bottom of the Device list. Select a Device (Controller) and OK to add it. An image of the Device and its functions is displayed.

Download the Nova Smart LCT Manual and review Section 6.3.

V-Sender allows the review of the Device Model, Ethernet Port and the number of cascaded devices in Device List.

Download the Nova Smart LCT Manual and review Section 6.4.

V-Sender allows the review of the Device attributes including the Device Name, Port Name, ID and the Firmware Version.

Download the Nova Smart LCT Manual and review Section 6.5.1.

Select Source Type and Data Bits from the Input tab.

Source Types include DVI, DP and HDMI

Data Bits from sources may differ. For example, Data Bits for DVI, DP and HDMI are 8.

In EDID, the Resolution and Refresh Rate can be preset.

Download the Nova Smart LCT Manual and review Section 6.5.2.

Montage

Enable Montage when the number of pixels in the LED Display exceeds the loading capacity of the Device. Only Auto Fit To Screen is available.

Main Screen

Zoom modes include Disable Zoom, Custom Zoom and Auto Fit To Screen.

Minor Screen

Set the size and start position of a Minor Screen as well as the size of position of the image to be displayed.

Video Source Synchronization

Synchronize the source input and output of the Device except when Montage is enabled.

Download the Nova Smart LCT Manual and review Section 6.5.3.

Control the Contrast, Saturation, Hue and Sharpness of the LED Display.

Select Apply to save the new settings or choose Default to restore Default Values.

Download the Nova Smart LCT Manual and review Section 6.5.4.

Select LCD Lock to lock out the LCD panel of the connected Device, Smart Gray Scale, De-interlace to convert to a Progressive Signal, Genlock to Synchronize read-only parameters, VGA Auto Processing and ADC Auto Calibration.

Download the Nova Smart LCT Manual and review Section 6.5.5.

Select Enable Audio Output and choose between HDMI Audio and External Audio. Adjust the volume using the slider.

Download the Nova Smart LCT Manual and review Section 6.5.6.

The Screen Settings can be configured like building blocks.

Select a Device from the Device Column, and add a Cabinet using the icons in the tool bar. Drag the mouse in a blank area of the Canvas to add multiple Cabinets or just click to add single Cabinets.

Select one or more Cabinets to move them about on the Canvas.

Download the Nova Smart LCT Manual and review Section 7.1.

NovaStar · Nova Smart LCT · Nova Taurus LCT · Nova Mars LCT · Nova Studio
NovaStar Nova Smart LCT · Introduction
Nova Smart LCT enables rotation of the Cabinets when equipped with NovaStar MCTRLR5 and NovaStar A8S Receiving Cards.

Single Cabinet

Select a single Cabinet and a Rotation Bar appears. Drag the mouse to rotate the Cabinet or set the center and angle of the rotation in Properties to the right of the Canvas.

Multiple Cabinets

Select multiple Cabinets and a Rotation Bar appears in each. Drag the mouse to rotate the Cabinets or set the center and angle of the rotation in Properties to the right of the Canvas.

Group

Select Edit and Group to Group together selected Cabinets. The Rotation Bar now appears in the center of the Group and the center and angle of the rotation can be set in Properties to the right of the Canvas.

Download the Nova Smart LCT Manual and review Section 7.2.

Select Tools, then Test Tool sub-menu to run a series of simple diagnostic tests. Note that this function is only supported in Windows.

🗀 Window  ⭢ 🗀 Pure Color  ⭢ 🗀 Gradual Change  ⭢ 🗀 Grid  ⭢ 🗀 Orientation  ⭢ 🗀 Self Test

Each test is self-explanatory and allows for filling out the LED Display with solid and gradated colors and grids to quickly pinpoint problems.

Download the Nova Smart LCT Manual and review Section 7.3.

Select PIP and chose the toolbar icon that best reflects the required layout.

In the Main Screen set the scaling using either Disable Zoom, Custom Zoom or Auto Fit Screen.

Select an area of the image to be shown on the LED Display. Using Auto Fit Screen causes the contents to be scaled automatically to fit the LED Display.

Download the Nova Smart LCT Manual and review Section 7.4.

Select Settings and Self-Test to run.

Color, Grid and Test Pattern are available.

When complete, select Normal to restore the LED Display.

Download the Nova Smart LCT Manual and review Section 7.5.

Select the Control page at the bottom of the window. Choose the Signal Source of the Main and Minor LED Display.

Screen Control provides for Black Out, Freeze, Normal, .

Download the Nova Smart LCT Manual and review Section 7.6.

The Montage function is called upon when the number of pixels in a display exceed the loading capacity of a single Device (Controller).

Select Output and Montage in the V-Sender window to set the montage.

Choose from Non-Equal Division when each Device loads a different area of the LED Display and Equal Division when each Device loads an identical area of the LED Display

Download the Nova Smart LCT Manual and review Section 7.7.

Select the Template page at the bottom of the window. Save the configuration as a template from one of the ten defaults, or delete other templates using the icons.

Download the Nova Smart LCT Manual and review Section 7.8.

Nova Smart LCT offers the ability to save a *.png image file that shows the Display Configuration from the front or back. The image file can be printed and shared with team members for easy reference.

Select File and Export to set the information of the image to be saved.

Choose a Front View or Back View and the Network Path.

The company name and corporate logo can be set, and the company name can be overlaid as a watermark. Select Export to complete.

Download the Nova Smart LCT Manual and review Section 7.9.

Pricing · NovaStar

Ponder and deliberate before you make a move. ~ Sun Tzu
Professional Series
NovaStar NovaPro HD $2600  (1)
NovaStar Jupiter J6 $3500  (1)
Vancouver Inventory
MCTRL Series
NovaStar MCTRL660 $600
NovaStar MCTRL600 $470
NovaStar MCTRL300 $270
NovaStar MSD300 $170
Vancouver Inventory

3-Year NovaStar Factory Warranty

Phobos Series
NovaStar MCTRL 4K $4100  (1)
NovaStar MCTRL R5 $2300
Vancouver Inventory
Taurus Series
NovaStar Taurus TB6 $470  (2)
NovaStar Taurus T6 $400
NovaStar Taurus TB3 $330  (2)
NovaStar Taurus T3 $260
Vancouver Inventory

NovaStar Nova VNNOX

VX Series
NovaStar VX4S $1900  (2)
NovaStar VX4U $1800
NovaStar VX2U $1400
Vancouver Inventory
Thunderview
NovaStar Thunderview S1 $0000
NovaStar Thunderview V1 $0000
NovaStar Thunderview TR100 $100
Vancouver Inventory

NovaStar NovaiCare

Telematics Canada is as proud of our fair pricing as we are of our brilliant technology, which is why we don't hesitate to clearly list both in plain view for our visitors to review and compare to our competition. We respect the value of your time by not wasting days of it just so you can get a ballpark quote for your project. Which is great news for our new clients. For the analog guys still playing in the old school sandbox...not so much.

Checklist

Don't drive yourself crazy trying to figure out the right series and the correct specifications and dimensions for your project. Just contact our offices and in ten minutes we can review everything and find out what works best for the space and the budget. There...I'm feeling better already.

Order

If you are like everyone else, you will leave this part to the last possible moment. Then we will share in your stress and jump through every imaginable hoop to meet your evolving schedule. We strive to have the most popular NovaStar products in stock at all times, but orders are first-come first-serve.

Ship

We can ship your order by air or ground as your budget and time allows. Shipping and Customs schedules can be estimated, but are external variables that are outside of our control. Allow plenty of time for unexpected delays. You would not believe how many National Holidays are observed in China. Seriously.

Install

Your installation will include a PC for content and a NovaStar controller to direct that content to the display. There will be power and data cables to hook everything up and a frame or support beams to mount your display. If you need assistance with this, Telematics can often suggest a local partner.

Service

NovaStar provides their full technical expertise to assist Telematics and our clients with any issues where we have requested their assistance. Most problems are diagnosed and resolved very quickly using remote access software, Skype and webcams or a simple exchange of emails and phone calls.

Warranty

NovaStar supports their products with a comprehensive 3-year factory warranty that is completely free of fine print from the Law Firm of Obfuscate, Muddle and Flummox, and is instead defined by simply keeping our customers' confidence by standing behind each and every product they make.

Contact · Telematics Canada

Sun Tzu said: We shall be unable to turn natural advantage to account unless we make use of local guides. ~ Sun Tzu
                       

Telematics Canada

375 Water Street, Suite 200
Vancouver, BC V6B 0M9
Canada

365 days
8:00 am to 8:00 pm

(1) 604 331 8795
This email address is being protected from spambots. You need JavaScript enabled to view it.
telematics.canada

https://www.telematics.ca
Telematics Canada (2000)

Michael Wolf

Canada · USA · International
(1) 604.331.8795
This email address is being protected from spambots. You need JavaScript enabled to view it.

Alicia Mottus

Administration
(1) 604.331.8795
This email address is being protected from spambots. You need JavaScript enabled to view it.