GlassVu Rear Projection Screens are available in 3 models that are suitable for low to high ambient light applications.

This image expands to reveal a close-up of the GlassVu CT88 as viewed under a high-resolution scanner. Note the high level of transparency that allows the details behind the screen to be seen.

GlassVu's light diffusion layer and forward scattering characteristics generate images that are free from pixelation and any colour shift when the viewing angle changes.

GlassVu is ideal for medium to large format storefront displays. There is no need for specialized projection equipment as a standard projector can be set at almost any incident angle to the screen.

GlassVu CT88 is a clear screen with 88% transmittance of light projected onto its surface and haze measured at 33.5%.

It is visible from a 150° angle to provide extraordinary off-centre viewing.

The near-transparency of the CT88 allows for content that can create the illusion of floating images moving across the screen or capture a rich landscape for projections onto a storefront window where ambient light is not a challenge.

The CT88 provides for excellent after-hours viewing in display windows where there is otherwise a requirement for transparency during business hours.

In planning your installation, note that the nature of a transparent screen is that it will allow a significant percentage of projected light to pass through the screen. This means that special attention is required to position the projector where it will not create a hot spot for your viewer.

Recommended Applications

• Digital Signage (low ambient light)
• Control Rooms (low ambient light)
• Boardrooms (low ambient light)
• Night Clubs (low ambient light)
• Theatre (low ambient light)

 from
$138/m²

Specifications

Installation Options

GlassVu Rear Projection Screens can be specified in a variety of roll lengths. Any number of smaller screens can be easily cut from the larger rolls using a straight edge and blade.

Application onto glass or acrylic is similar to installing solar tint to a window. GlassVu has built-in adhesive protected by a disposable layer of film. Tools required include a water spray bottle, a small amount of soap and a soft rubber edge such as a squeegee or spatula.

Alternatively, the use of Cling Film allows for a short term installation with the adhesive left unexposed.

We recommend the use of a Window Tint Professional in any application.

Projector Orientation To GlassVu Surface

GlassVu Rear Projection Screens will work within a wide range of projection angles. The strongest image on any diffusion screen will be achieved at 0°; however projector angles of 30° or more are common in GlassVu installations.

Standard Rolls

Maintenance

• Do not expose the screen to sharp objects
• Do not expose the screen to detergents, solvents or other liquids
• Use a soft brush or electrostatic dust cloth for cleaning

Environment

• Service temperature from 0° to 40° Celsius
• Humidity from 0% to 80%
• Results may vary and are for comparative use only