Dilad Rear Projection Screens are available in 3 models that are suitable for low to high ambient light applications.

This image expands to reveal a close-up of the Dilad GSK as viewed under a high-resolution scanner. Note that this is a grey screen that captures much of the projected light with virtually no transparency.

Dilad's light diffusion layer and forward scattering characteristics generate images that are free from pixelation and any colour shift when the viewing angle changes.

Dilad is ideal for medium to large format storefront displays. There is no need for specialized projection equipment as a standard projector can be set at almost any incident angle to the screen.

The Dilad GSK is a grey screen with 58% transmittance of light projected onto its surface and haze measured at 92%.

This is a very high contrast screen that is ideal for presenting high definition content.

The high gain and extraordinary haze of the GSK means that projected images are bright and powerful for easy viewing, while the grey screen fits nicely into retail surroundings when not in use.

The GSK is an excellent all-round screen for most digital signage applications, including many higher ambient light settings other than those in direct sunlight.

In planning your installation there is virtually no concern of hot spots or light passing through the screen and into the eyes of your audience.

Recommended Applications

• Digital Signage (moderate to high ambient light)
• Control Rooms (moderate to high ambient light)
• Boardrooms (moderate to high ambient light)
• Classrooms (moderate to high ambient light)
• Night Clubs (moderate to high ambient light)
• Home Theatre (moderate to high ambient light)

 from
$188/m²

Specifications

Installation Options

Dilad Rear Projection Screens can be specified in a variety of roll lengths. Any number of smaller screens can be easily cut from the larger rolls using a straight edge and blade.

Application onto glass or acrylic is similar to installing solar tint to a window. Dilad has built-in adhesive protected by a disposable layer of film. Tools required include a water spray bottle, a small amount of soap and a soft rubber edge such as a squeegee or spatula.

Alternatively, the use of Cling Film allows for a short term installation with the adhesive left unexposed.

Projector Orientation To Dilad Surface

Dilad Rear Projection Screens will work within a wide range of projection angles. The strongest image on any diffusion screen will be achieved at 0°; however projector angles of 30° or more are common in Dilad installations.

Standard Rolls

Maintenance

• Do not expose the screen to sharp objects
• Do not expose the screen to detergents, solvents or other liquids
• Use a soft brush or electrostatic dust cloth for cleaning

Environment

• Service temperature from 0° to 40° Celsius
• Humidity from 0% to 80%
• Results may vary and are for comparative use only